Prepare rockwool for planting lettuce

How it's done

  1. First we take a bowl and that is large enough to have all of our rockwool soaked in water.
  2. Fill 3/4 of bowl with tap water
  3. Take a pH meter and remove the black cap from it.
  4. Place pH meter tip (the point that cap was placed before we removed it) in water and turn the pH meter ON.
  5. Wait few minutes for value to stabilize
  6. If the pH level is higher than 4.0 then add few drops of the pH Down (or pH Minus) liquid to bowl and stir it well and go to 3. point of this step and repeat points 3,4,5 and 6 until you get pH level of the water in bowl to be 4.0
  7. Now you can put cap back to pH meter and turn pH meter off and place it somewhere else
  8. Take the thermometer and check the temperature of the water
  9. If temperature is not in range of 15 to 20 ºC (59 - 68 ºF) then heat up or cool down water so it’s temperature is in our desired temperature range
  10. Now we can place our rockwool in the bowl with water
  11. Put it aside for 30 min and then place it on the steep surface so the rockwool can release all unnecessary water.
  12. Leave the rockwool on that surface for 15 min before proceeding to next step.

Activity Q&A

Need help with this activity?Add the first post