Armin Salcin, young experienced hardware developer.
Sarajevo, Bosnia and Herzegovina
My Projects

In this tutorial you will learn how to program standalone ESP8266 to work wi...

This Nextion tutorial will teach you how to get started with the Nextion LCD...

Learn how to make iBeacon using only cheap hm-10 module.

Learn how to hookup CityOS Air device

This tutorial will show how to connect esp and iftt service

You will learn how to conect sensors to esp8266

You will learn how to hardware connect esp8266 to other devices

You will learn how to implement esp8266 library to arduino ide.

You will learn how to connect arduino with flowthings.io

You will learn how to connect Blynk with Arduino as shield

In this tutorial you will learn how to put the new AT-firmware to n ESP8266 ...

You will learn how to implement board to the Arduino IDE.

Discussions

Re: Flash Config Error

Emir you can’t use this tipe of code with AT-Firmware, as AT-Firmware can only use AT commands. You can send AT commands via serial to esp82...

Re: Reading Error

Please check dht pin you connected and pin on esp and pin you put in code so it must be same also check that gpio0 is HIGH during reading data.