ProtoMat E34 / E44

The E series LPKF ProtoMats are a low-cost introduction to the world of professional in-house printed circuit board prototyping. They will structure single- or double-sided circuit boards, drill holes for through-plating and cut individual boards from the base material.

Product Details

The LPKF ProtoMat E34 has a 30 000 rpm spindle, and the E44 even reaches up to 40 000 rpm. The maximum travel speed is up to 100 mm per second. For manual tool change both possess a collet with a precise height adjustment by micrometer screw.
With a resolution of less than 1 μm, a repeat accuracy of ± 5 μm, and a precision of ± 20 μm in the fitting hole system, the small ProtoMat circuit board plotters are more than able to meet the demands of milling single- and double-sided printed circuit boards.

ProtoMat E34
Max. material size andlayout area (X x Y x Z): 229 x 305 x 5 mm ( 9” x 12” x 0.2”)
Travel speed diagonal (X x Y): 100 mm/s (3.9”/s)
Milling spindle: Max. 30 000 rpm
Drilling speed: 100 holes/min
Tool holder: 3,175 mm (1/8”), manual tool change
Repeatability: ± 5 µm (± 0.2 mil)
Mechanical resolution (X/Y): ± 0.8 µm (± 0.04 mil)
Accuracy in the fitting hold system: ± 20 µm (± 0.8 mil)
Weight : 15 kg (33 lbs)
Ambient temperature: 15 °C - 25 °C / (59 °F - 77 °F)
Power supply: 100 - 240 V, 50 - 60 Hz, 120 W
Required USB ports: 1
Required accessories: Exhaust unit

ProtoMat E44
Max. material size andlayout area (X x Y x Z): 229 x 305 x 5 mm ( 9” x 12” x 0.2”)
Travel speed diagonal (X x Y): 100 mm/s (3.9”/s)
Milling spindle: Max. 40 000 rpm
Drilling speed: 100 holes/min
Tool holder: 3,175 mm (1/8”), manual tool change
Repeatability: ± 5 µm (± 0.2 mil)
Mechanical resolution (X/Y): ± 0.8 µm (± 0.04 mil)
Accuracy in the fitting hold system: ± 20 µm (± 0.8 mil)
Resolution camera: Max. 50 mm/s (2”/s)
Weight : 15 kg (33 lbs)
Ambient temperature: 15 °C - 25 °C / (59 °F - 77 °F)
Power supply: 100 - 240 V, 50 - 60 Hz, 120 W
Required USB ports: 2
Required accessories: Exhaust unit

http://www.lpkfusa.com/products/pcb_prototyping/machines/protomat_e…

Discussion

Got questions about this product?Add the first post